English: Illustration from 1911 Encyclopædia Britannica, article BAROMETER.
Fig. 4.—Aneroid Barometer.
Fig. 4 represents the internal construction, as seen when the face is removed, but with the hand still attached, of an aneroid which differs only slightly from Vidie's form.
a is a flat circular metallic box, having its upper and under surfaces corrugated in concentric circles. This box or chamber being partially exhausted of air, through the short tube
b, which is subsequently made air-tight by soldering, constitutes a spring, which is affected by every variation of pressure in the external atmosphere, the corrugations on its surface increasing its elasticity. At the centre of the upper surface of the exhausted chamber there is a solid cylindrical projection
x, to the top of which the principal lever
cde is attached. This lever rests partly on a spiral spring at
d; it is also supported by two vertical pins, with perfect freedom of motion. The end
e of the lever is attached to a second or small lever
f, from which a chain
g extends to
h, where it works on a drum attached to the axis of the hand, connected with a hair spring at
h, changing the motion from vertical to horizontal, and regulating the hand, the attachments of which are made to the metallic plate
i. The motion originates in the corrugated elastic box
a, the surface of which is depressed or elevated as the weight of the atmosphere is increased or diminished, and this motion is communicated through the levers to the axis of the hand at
h. The spiral spring on which the lever rests at
d is intended to compensate for the effects of alterations of temperature.