BIC Turntable 20Z Manual
Appearance
Owner's Manual
Model 20Z | Made in U.S.A.
Important: Read this manual completely before attempting to operate.
Unpacking The Unit:
- Remove the top cardboard pad.
- Grasp the dust cover and lift straight up.
- To remove the unit, grasp the front and rear and lift up. As you do this the styrofoam fillers will come out.
-
Packed in the styrofoam filler are the following:
- Tonearm Counterbalance Wgt.
- Manual 45 RPM Adaptor
- Cartridge Mounting Hardware and Extra Shell Retaining Screw.
- Screwdriver
- Dust Cover Hinge Pins (2)[1]
- Automatic Spindle
- Manual Spindle
- Remove all plastic film and DISCARD. THIS MATERIAL CAN BE HAZARDOUS TO CHILDREN.
WARNING:
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
- ↑ May be factory installed.
Table of contents (not listed in original)
This work is in the public domain in the United States because it was legally published within the United States (or the United Nations Headquarters in New York subject to Section 7 of the United States Headquarters Agreement) between 1929 and 1977 (inclusive) without a copyright notice.
This work may be in the public domain in countries and areas with longer native copyright terms that apply the rule of the shorter term to foreign works.
Public domainPublic domainfalsefalse