Gouges.—These have the same action as that of a chisel, but instead of being flat their sections form arcs of circles (see Fig. 55).
Draw Knife.—The draw knife (Fig. 56) is used for roughing stuff to shape preparatory to working with finer tools.
Spokeshaves.—An ordinary spokeshave is merely a knife edge in a suitable holder (Fig. 57); it may jump if the iron is loose, or if the back part of the iron touches the work before the cutting edge. Spokeshaves are best made with iron stocks and with screws to regulate the cutting iron (Fig. 58).
Planes.—These are the tools chiefly used for smoothing work which has been sawn to approximate size. The simplest plane is a chisel firmly fixed into a wooden block. The construction of an ordinary plane is shown in the sectional view (Fig. 59),
in which A shows the stock; B, the wedge; C, cutting iron; D, back iron ; F, screw and nut for fastening the cutting and back irons together; the mouth through which the shavings pass upwards is shown. The jack plane (Fig. 60)
is the first plane applied to the sawn wood; its parts are: the stock, 17 in. long; the toat, or handle; the wedge; the cutting iron, or cutter, about 2⅛ in. wide; and the back iron. The trying or trueing plane (Fig. 61)
is of similar construction, but is much longer, so as to produce truer surfaces. A still longer trying plane called the jointer is used for jointing boards in long lengths; since the introduction of machinery it is seldom used. The smoothing plane (Fig. 62) smooths the work to form a finished surface ; for pine or other soft woods it is 9 in. long, and its iron is 2¼ in. wide on the cutting face. Some smoothing planes have iron fronts, as shown in the sectional view, Fig. 63; these can be adjusted for the finest shaving desired.
