JOINTS.
Introduction.—Full instructions on setting out, cutting, and fitting most of the joints used in carpentry and joinery are given in the companion volume, "Woodworking," and the reader is assumed to be familiar with all these processes. The object of the present chapter is merely to present brief particulars of the joints in general use and to provide a collection of illustrations handy for reference, so that the present treatment of technical woodworking may not be incomplete.
 | An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image]  | |
Fig. 178.— Straight Halved Joint.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 179.— Angle Halved Joint.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 180.— Angle Halved Joint, Apart.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 181.— Cross-halved (or Cross Lap) Joint.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 182.—Dovetail Lap Joint.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 183.—Bevelled Halving.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 184.—Shouldered Dovetail Halving.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 185.— Single Notching.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 186.—Double Notching.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 187.— Dovetail Notching, Wedged.
| An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Cassells' Carpentry and Joinery.djvu/72}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
Fig. 188.—Dovetail Notching.
Joints in Carpentry.
Halved Joints.—The simplest joints used in carpentry are the various forms of halving: simple halved joints (Figs.
