are also used. The clay, after being powdered and sifted, is mixed with a little water and oil, and well kneaded. The two halves of the mould are then roughly shaped with the hand, and a genuine coin is pressed between them, so as to obtain the obverse on one half and the reverse impression on the other. The whole is then hardened in an extempore oven, and the hole to admit the metal is bored, so as to admit of its being poured in from the edge. The halves are then separated,and the genuine rupee is tilted out; the molten alloy of tin or pewter is poured in, and allowed to cool. According to the other method, badap clay brought from their own country is considered the most suitable for the moulds, though Multani clay may be used when they run out of badap. Two discs are made from clay kneaded with water. These discs are then highly polished on the inner surface with the top of a jvari stalk called danthal. A rupee, slightly oiled, is then placed between the discs, which are firmly pressed over it. The whole is then thoroughly hardened in the fire. The alloy used in these moulds differs from that used in the others, and consists of an alloy of lead and copper. In both cases, the milling is done by the hand with a knife or a piece of shell. The Chapperbands select their victims carefully. They seem to be fairly clever judges of persons from their physiognomy. They easily find out the duffer and the gull in both sexes, and take care to avoid persons likely to prove too sharp for them. They give preference to women over men. The commonest method is for the Bhondar to show a quantity of copper collected by him in his character of beggar, and ask for silver in its place. The dupe produces a rupee, which he looks at. He then shakes his head sadly, and hands back a counterfeit coin, saying that such coins are not
