wayside installation in Southern India, may be mentioned those of Vīran, the Madura godling, who requires offerings of liquor, Māriamma, the small-pox goddess, and the evil spirit Sangili Karappan. Representations are also carved of nāgas or serpents, and installed by the dozen round the village asvatha tree (Ficus religiosa). Almost every week, the mail steamer to Rangoon takes a heavy consignment of stone and metal idols commissioned by the South Indian settlers in Burma for purposes of domestic and public worship. The usual posture of mulavigrahas is a standing one, the figure of Vishnu in the Srirangam temple, which represents the deity as lying down at full length, being an exception to this rule. The normal height is less than four feet, some idols, however, being of gigantic proportions. Considering the very crude material on which he works, and the primitive methods of stone-carving which he continues to favour, the expert craftsman achieves quite a surprising degree of smoothness and polish. It takes him several weeks of unremitting toil to produce a vigraha that absolutely satisfies his critical eye. I have seen him engaged for hours at a stretch on the trunk of Vignesvara or the matted tuft of a Rishi. The casting of utsavavigrahas involves a greater variety of process than the carving of stone figures. The substance usually employed is a compound of brass, copper and lead, small quantities of silver and gold being added, means permitting. The required figure is first moulded in some plastic substance, such as wax or tallow, and coated with a thin layer of soft wet clay, in which one or two openings are left. When the clay is dry, the figure is placed in a kiln, and the red-hot liquid metal is poured into the hollow created by the running out of the melted wax. The furnace is then
