toises—an unexpected result, which has led to the remeasurement of the arc by Sir Thomas Maclear (see Geodesy).
Passing over the measurements made between Rome and Rimini and on the plains of Piedmont by the Jesuits Ruggiero Giuseppe Boscovich and Giovanni Battista Beccaria, and also the arc measured with deal rods in North America by Charles Mason and Jeremiah Dixon, we come to the commencement of the English triangulation. In 1783, in consequence of a representation from Cassini de Thury on the advantages that would accrue from the geodetic connexion of Paris and Greenwich, General William Roy was, with the king’s approval, appointed by the Royal Society to conduct the operations on the part of England, Count Cassini, Méchain and Delambre being appointed on the French side. A precision previously unknown was attained by the use of Ramsden’s theodolite, which was the first to make the spherical excess of triangles measurable. The wooden rods with which the first base was measured were replaced by glass rods, which were afterwards rejected for the steel chain of Ramsden. (For further details see Account of the Trigonometrical Survey of England and Wales.)
Shortly after this, the National Convention of France, having agreed to remodel their system of weights and measures, chose for their unit of length the ten-millionth part of the meridian quadrant. In order to obtain this length precisely, the remeasurement of the French meridian was resolved on, and deputed to J. B. J. Delambre and Pierre François André Méchain. The details of this operation will be found in the Base du système métrique décimale. The arc was subsequently extended by Jean Baptiste Biot and Dominique François Jean Arago to the island of Iviza. Operations for the connexion of England with the continent of Europe were resumed in 1821 to 1823 by Henry Kater and Thomas Frederick Colby on the English side, and F. J. D. Arago and Claude Louis Mathieu on the French.
The publication in 1838 of Friedrich Wilhelm Bessel’s Gradmessung in Ostpreussen marks an era in the science of geodesy. Here we find the method of least squares applied to the calculation of a network of triangles and the reduction of the observations generally. The systematic manner in which all the observations were taken with the view of securing final results of extreme accuracy is admirable. The triangulation, which was a small one, extended about a degree and a half along the shores of the Baltic in a N.N.E. direction. The angles were observed with theodolites of 12 and 15 in. diameter, and the latitudes determined by means of the transit instrument in the prime vertical—a method much used in Germany. (The base apparatus is described in the article Geodesy.)
The principal triangulation of Great Britain and Ireland, which was commenced in 1783 under General Roy, for the more immediate purpose of connecting the observatories of Greenwich and Paris, had been gradually extended, under the successive direction of Colonel E. Williams, General W. Mudge, General T. F. Colby, Colonel L. A. Hall, and Colonel Sir Henry James; it was finished in 1851. The number of stations is about 250. At 32 of these the latitudes were determined with Ramsden’s and Airy’s zenith sectors. The theodolites used for this work were, in addition to the two great theodolites of Ramsden which were used by General Roy and Captain Kater, a smaller theodolite of 18 in. diameter by the same mechanician, and another of 24 in. diameter by Messrs Troughton and Simms. Observations for determination of absolute azimuth were made with those instruments at a large number of stations; the stars α, δ, and λ Ursae Minoris and 51 Cephei being those observed always at the greatest azimuths. At six of these stations the probable error of the result is under 0·4″, at twelve under 0·5″, at thirty-four under 0·7″: so that the absolute azimuth of the whole network is determined with extreme accuracy. Of the seven base lines which have been measured, five were by means of steel chains and two with Colby’s compensation bars (see Geodesy). The triangulation was computed by least squares. The total number of equations of condition for the triangulation is 920; if therefore the whole had been reduced in one mass, as it should have been, the solution of an equation of 920 unknown quantities would have occurred as a part of the work. To avoid this an approximation was resorted to; the triangulation was divided into twenty-one parts or figures; four of these, not adjacent, were first adjusted by the method explained, and the corrections thus determined in these figures carried into the equations of condition of the adjacent figures. The average number of equations in a figure is 44; the largest equation is one of 77 unknown quantities. The vertical limb of Airy’s zenith sector is read by four microscopes, and in the complete observation of a star there are 10 micrometer readings and 12 level readings. The instrument is portable; and a complete determination of latitude, affected with the mean of the declination errors of two stars, is effected by two micrometer readings and four level readings. The observation consists in measuring with the telescope micrometer the difference of zenith distances of two stars which cross the meridian, one to the north and the other to the south of the observer at zenith distances which differ by not much more than 10′ or 15′, the interval of the times of transit being not less than one nor more than twenty minutes. The advantages are that, with simplicity in the construction of the instrument and facility in the manipulation, refraction is eliminated (or nearly so, as the stars are generally selected within 25° of the zenith), and there is no large divided circle. The telescope, which is counterpoised on one side of the vertical axis, has a small circle for finding, and there is also a small horizontal circle. This instrument is universally used in American geodesy.
The principal work containing the methods and results of these operations was published in 1858 with the title “Ordnance Trigonometrical Survey of Great Britain and Ireland. Account of the observations and calculations of the principal triangulation and of the figure, dimensions and mean specific gravity of the earth as derived therefrom. Drawn up by Captain Alexander Ross Clarke, R.E., F.R.A.S., under the direction of Lieut.-Colonel H. James, R.E., F.R.S., M.R.I.A., &c.” A supplement appeared in 1862: “Extension of the Triangulation of the Ordnance Survey into France and Belgium, with the measurement of an arc of parallel in 52° N. from Valentia in Ireland to Mount Kemmel in Belgium. Published by . . . Col. Sir Henry James.”
Extensive operations for surveying India and determining the figure of the earth were commenced in 1800. Colonel W. Lambton started the great meridian arc at Punnae in latitude 8° 9′, and, following generally the methods of the English survey, he carried his triangulation as far north as 20° 30′. The work was continued by Sir George (then Captain) Everest, who carried it to the latitude of 29° 30′. Two admirable volumes by Sir George Everest, published in 1830 and in 1847, give the details of this undertaking. The survey was afterwards prosecuted by Colonel T. T. Walker, R.E., who made valuable contributions to geodesy. The working out of the Indian chains of triangle by the method of least squares presents peculiar difficulties, but, enormous in extent as the work was, it has been thoroughly carried out. The ten base lines on which the survey depends were measured with Colby’s compensation bars.
The survey is detailed in eighteen volumes, published at Dehra Dun, and entitled Account of the Operations of the Great Trigonometrical Survey of India. Of these the first nine were published under the direction of Colonel Walker; and the remainder by Colonels Strahan and St G. C. Gore, Major S. G. Burrard and others. Vol. i., 1870, treats of the base lines; vol. ii., 1879, history and general descriptions of the principal triangulation and of its reduction; vol. v., 1879, pendulum operations (Captains T. P. Basevi and W. T. Heaviside); vols. xi., 1890, and xviii., 1906, latitudes; vols. ix., 1883, x., 1887, xv., 1893, longitudes; vol. xvii., 1901, the Indo-European longitude-arcs from Karachi to Greenwich. The other volumes contain the triangulations.
In 1860 Friedrich Georg Wilhelm Struve published his Arc du méridien de 25° 20′ entre le Danube et la Mer Glaciale mesuré depuis 1816 jusqu’en 1855. The latitudes of the thirteen astronomical stations of this arc were determined partly with vertical circles and partly by means of the transit instrument in the prime vertical. The triangulation, a great part of which, however, is a simple chain of triangles, is reduced by the method of least squares, and the probable errors of the resulting distances of parallels is given; the probable error of the whole arc in length is ± 6·2 toises. Ten base lines were measured. The sum of the
