 |
| Fig. 41.—Manora Point Apparatus and Lantern. |
Multiform Apparatus.—In order to double the power to be obtained from a single apparatus at stations where lights of exceptionally high intensity are desired, the expedient of placing one complete lens apparatus above another has sometimes been adopted, as at the Bishop Rock (fig. 13), and at the Fastnet lighthouse in Ireland (Plate I., fig. 54). Triform and quadriform apparatus have also been erected in Ireland; particulars of the Tory Island triform apparatus will be found in table VII. The adoption of the multiform system involves the use of lanterns of increased height.
Twin Apparatus.—Another method of doubling the power of a light is by mounting two complete and distinct optics side by side on the same revolving table, as I shown in fig. 43 of the Île Vierge apparatus. Several such lights have been installed by the French Lighthouse Service.
Port Lights.—Small self-contained lanterns and lights are in common use for marking the entrances to harbours and in other similar positions where neither high power nor long range is requisite. Many such lights are unattended in the sense that they do not require the attention of a keeper for days and even weeks together. These are described in more detail in section 6 of this article. A typical port light consists of a copper or brass lantern containing a lens of the fourth order (250 mm. focal distance) or smaller, and a single wick or 2-wick Argand capillary burner. Duplex burners are also used. The apparatus may exhibit a fixed light or, more usually, an occulting characteristic is produced by the revolution of screens actuated by spring clockwork around the burner. The lantern may be placed at the top of a column, or suspended from the head of a mast. Coal gas and electricity are also used as illuminants for port lights when local supplies are available. The optical apparatus used in connexion with electric light is described below.
”Orders” of Apparatus.—Augustin Fresnel divided the dioptric lenses, designed by him, into “orders” or sizes depending on their local distance. This division is still used, although two additional “orders,” known as “small third order” and “hyper-radial” respectively are in ordinary use. The following
