1899), p. 103. 84 T.M. 9, p. 113. 85 T.M. 1, p. 77, and Nature, 57, pp. 160 and 180. 86 M.Z. 15, p. 175. 86a Sitz. der k. k. Akad. der Wiss. Wien, math. nat. Classe, 1898, Bd. cvii., Abth. ii. 87 P.T. (A) 180, p. 467. 88 Die Tägliche Periode der erdmagnetischen Elemente (St Petersburg, 1902). 89 R. Accad. Lincei Atti, viii. 1899, pp. 69, 121, 176, 269 and previous volumes, see also Séances de la Soc. Franc. de Physique, 1899, p. 118. 90 Bull. Soc. Vaud., Sc. Nat. 1906, 42, p. 225. 91 Comptes rendus, 1905, 141, p. 567. 92 National Antarctic Expedition 1901–1904, “Magnetic Observations.” 93 The Norwegian Aurora Polaris Expedition 1902–1903, vol. i. 94 (1) p. 163. (C. Ch.)
MAGNETITE, a mineral forming the natural magnet (see Magnetism), and important also as an iron-ore. It is an iron-black, opaque mineral, with metallic lustre; hardness about 6, sp. gr. 4.9 to 5.2. When scratched, it yields a black streak. It is an oxide of iron having the formula Fe3O4, corresponding with 72.4% of metal, whence its great value as an ore. It may be regarded as a ferroso-ferric oxide, FeO.Fe2O3, or as iron ferrate, Fe″Fe2‴O4. Titanium is often present, and occasionally the mineral contains magnesium, nickel, &c. It is always strongly magnetic. Magnetite crystallizes in the cubic system, usually in octahedra, less commonly in rhombic dodecahedra, and not infrequently in twins of the “spinel type” (fig. 1). The rhombic faces of the dodecahedron are often striated parallel to the longer diagonal. There is no distinct cleavage, but imperfect parting may be obtained along octahedral planes.
Fig. 1.
Magnetite is a mineral of wide distribution, occurring as grains in many massive and volcanic rocks, like granite, diorite and dolerite. It appears to have crystallized from the magma at a very early period of consolidation. Its presence contributes to the dark colour of many basalts and other basic rocks, and may cause them to disturb the compass. Large ore-bodies of granular and compact magnetite occur as beds and lenticular masses in Archean gneiss and crystalline schists, in various parts of Norway, Sweden, Finland and the Urals; as also in the states of New York, New Jersey, Pennsylvania and Michigan, as well as in Canada. In some cases it appears to have segregated from a basic eruptive magma, and in other cases to have resulted from metamorphic action. Certain deposits appear to have been formed, directly or indirectly, by wet processes. Iron rust sometimes contains magnetite. An interesting deposit of oolitic magnetic ore occurs in the Dogger (Inferior Oolite) of Rosedale Abbey, in Yorkshire; and a somewhat similar pisolitic ore, of Jurassic age, is known on the continent as chamoisite, having been named from Chamoison (or Chamoson) in the Valais, Switzerland. Grains of magnetite occur in serpentine, as an alteration-product of the olivine. In emery, magnetite in a granular form is largely associated with the corundum; and in certain kinds of mica magnetite occurs as thin dendritic enclosures. Haematite is sometimes magnetic, and A. Liversidge has shown that magnetite is probably present. By deoxidation, haematite may be converted into magnetite, as proved by certain pseudomorphs; but on the other hand magnetite is sometimes altered to haematite. On weathering, magnetite commonly passes into limonite, the ferrous oxide having probably been removed by carbonated waters. Closely related to magnetite is the rare volcanic mineral from Vesuvius, called magnoferrite, or magnesioferrite, with the formula MgFe2O4; and with this may be mentioned a mineral from Jakobsberg, in Vermland, Sweden, called jakobsite, containing MnFe2O4. (F. W. R.*)
MAGNETOGRAPH, an instrument for continuously recording
the values of the magnetic elements, the three universally chosen
being the declination, the horizontal component and the vertical
component (see Terrestrial Magnetism). In each case the
magnetograph only records the variation of the element, the
absolute values being determined by making observations in
the neighbourhood with the unifilar magnetometer (q.v.) and
inclinometer (q.v.).
Declination.—The changes in declination are obtained by means of a magnet which is suspended by a long fibre and carries a mirror, immediately below which a fixed mirror is attached to the base of the instrument. Both mirrors are usually concave; if plane, a concave lens is placed immediately before them. Light passing through a vertical slit falls upon the mirrors, from which it is reflected, and two images of the slit are produced, one by the movable mirror attached to the magnet and the other by the fixed mirror. These images would be short lines of light; but a plano-cylindrical lens is placed with its axis horizontal just in front of the recording surface. In this way a spot of light is obtained from each mirror. The recording surface is a sheet of photographic paper wrapped round a drum which is rotated at a constant speed by clockwork about a horizontal axis. The light reflected from the fixed mirror traces a straight line on the paper, serving as a base line from which the variations in declination are measured. As the declination changes the spot of light reflected from the magnet mirror moves parallel to the axis of the recording drum, and hence the distance between the line traced by this spot and the base line gives, for any instant, on an arbitrary scale the difference between the declination and a constant angle, namely, the declination corresponding to the base line. The value of this constant angle is obtained by comparing the record with the value for the declination as measured with a magnetometer. The value in terms of arc of the scale of the record can be obtained by measuring the distance between the magnet mirror and the recording drum, and in most observations it is such that a millimetre on the record represents one minute of arc. The time scale ordinarily employed is 15 mm. per hour, but in modern instruments provision is generally made for the time scale to be increased at will to 180 mm. per hour, so that the more rapid variations of the declination can be followed. The advantages of using small magnets, so that their moment of inertia may be small and hence they may be able to respond to rapid changes in the earth’s field, were first insisted upon by E. Mascart,[1] while M. Eschenhagen[2] first designed a set of magnetographs in which this idea of small moment of inertia was carried to its useful limit, the magnets only weighing 1.5 gram each, and the suspension consisting of a very fine quartz fibre.
Horizontal Force.—The variation of the horizontal force is obtained by the motion of a magnet which is carried either by a bifilar suspension or by a fairly stiff metal wire or quartz fibre. The upper end of the suspension is turned till the axis of the magnet is at right angles to the magnetic meridian. In this position the magnet is in equilibrium under the action of the torsion of the suspension and the couple exerted by the horizontal component, H, of the earth’s field, this couple depending on the product of H into the magnetic moment, M, of the magnet. Hence if H varies the magnet will rotate in such a way that the couple due to torsion is equal to the new value of H multiplied by M. Since the movements of the magnet are always small, the rotation of the magnet is proportional to the change in H, so long as M and the couple, θ, corresponding to unit twist of the suspension system remain constant. When the temperature changes, however, both M and θ in general change. With rise of temperature M decreases, and this alone will produce the same effect as would a decrease in H. To allow for this effect of temperature a compensating system of metal bars is attached to the upper end of the bifilar suspension, so arranged that with rise of temperature the fibres are brought nearer together and hence the value of θ decreases. Since such a decrease in θ would by itself cause the magnet to turn in the same direction as if H had increased, it is possible in a great measure to neutralize the effects of temperature on the reading of the instrument. In the case of the unifilar suspension, the provision of a temperature compensation is not so easy, so that what is generally done is to protect the instrument from temperature variation as much as possible and then to correct the indications so as to allow for the residual changes, a continuous record of the temperature being kept by a recording thermograph attached to the instrument. In the Eschenhagen pattern instrument, in which a single quartz fibre is used for the suspension, two magnets are placed in the vicinity of the suspended magnet and are so arranged that their field partly neutralizes the earth’s field; thus the torsion required to hold the magnet with its axis perpendicular to the earth’s field is reduced, and the arrangement permits of the sensitiveness being altered by changing the position of the deflecting magnets. Further, by suitably choosing the positions of the deflectors and the coefficient of torsion of the fibre, it is possible to make the temperature coefficient vanish. (See Adolf Schmidt, Zeits. für Instrumentenkunde, 1907, 27, 145.) The method of recording the variations in H is exactly the same as that adopted in the case of the declination, and the sensitiveness generally adopted is such that 1 mm. on the record represents a change in H of .00005 C.G.S., the time scale being the same as that employed in the case of the declination.
Vertical Component.—To record the variations of the vertical component use is made of a magnet mounted on knife edges so that it can turn freely about a horizontal axis at right angles to its
