240, A, B, and C, to be nailed in place, and D to be movable as in the case of the doll-house. Make a three-by-five-inch window in the center of D, and fasten the glass
Fig. 240.—Front Gable-End.
in place with strips cut as described in Chapter XIII. Strips should be nailed to the roof just inside of the movable section to prevent the latter from setting in too far, and a spring catch fastened to C and D as shown, to hold the movable section in place.
Figure 241 gives the patterns and measurements for
The Stall Partitions, four of which Feed Trough should be cut out and fastened to the floor of the stable four inches apart, or so they will divide the inside width into five equal stalls.
Fig. 241.—Stall Partitions.
The Feed-Troughs are made out of two strips of cigar-
