erelong they are thrown aside at a great loss.
The successful application of steam-power to farm-work is a desideratum—especially a steam-plow. It is not enough that a machine operated by steam will really plow. To be successful, it must, all things considered, plow better than can be done with animal-power. It must do all the work as well, and cheaper; or more rapidly, so as to get through more perfectly in season; or in some way afford an advantage over plowing with animals, else it is no success. I have never seen a machine intended for a steam-plow. Much praise and admiration are bestowed upon some of them, and they may be, for aught I know, already successful; but I have not perceived the demonstration of it. I have thought a good deal, in an abstract way, about a steam-plow. That one which shall be so contrived as to apply the larger proportion of its power to the cutting and turning the soil, and the smallest, to the moving itself over the field, will be the best one. A very small stationary-engine would draw a large gang of plows through the ground from a short distance to itself; but when it is not stationary, but has to move along like a horse, dragging the plows after it, it must have additional power to carry itself; and the difficulty grows by what is intended to overcome it; for what adds power also adds size and weight to the machine, thus increasing again the demand for power. Suppose you construct the machine so as to cut a succession of short furrows, say a rod in length, transversely to the course the machine is locomoting, something like the shuttle in weaving. In such case the
