operation of planing will greatly facilitate the subsequent process.[1]
The plates are next to be tried by the straight edge, by a skilful use of which a very small degree of inaccuracy may be detected.
Let one of the three plates be now selected as the model, and the others be surfaced to it with the aid of colouring matter. For distinctness they may be called Nos. 1, 2, and 3. When Nos. 2 and 3 have been brought up to No. 1, compare them together. It is evident that if No. 1 be in any degree out of truth, Nos. 2 and 3 will be alike, and the nature of their error will become sensible on comparing them together by the intervention of colour. To bring them to a true plane, equal quantities must be taken in both from corresponding places. When this has been done with all the skill the mechanic may possess, and Nos. 2 and 3 are found to agree, the next step is to get up No. 1 to both, applying it to them in immediate succession, so as to compare the impressions. The art here lies in getting No. 1 between the two, which is the probable direction of the true plane. It is to be presumed that No. 1 is now nearer truth than
- ↑ The plates, after having been planed, should be allowed to rest for two or three weeks on their three bearing points. This will afford them time to settle in the form which they will naturally assume.
