Besides the netting-cord (commonly coir, the fiber of the cocoa-nut husk, which is very durable in the water), the only tool used is the mesh-block (E, Fig. 4). This is a thin block of hard wood rasped into shape, and, since these tools are treasured as heirlooms, together with interminably long rhythmical recitals of the wonderful takes of fish made by nets fabricated on each block, the wood most commonly employed is the very dense and hard iron-wood (Casuarina equisetifolia). It is highly polished and usually ornamented upon the ends with property marks, showing the exogamous marriage class and gens of the owner, which here take the place occupied by tribal distinctions among the endogamous races. The blocks are commonly of uniform size. Their length, which is practically a constant quantity, is determined by the length (about five inches) which may be held between the extreme tips of the fingers and the ball of the thumb, for that is its position when in use and to secure it against slipping the edges are carefully brought to a true right angle. The height of the block is, of course, determined by the width of mesh desired, but a height about equal to the breadth of the hand across the palm is most frequent, since the mesh made upon that gauge is found most satisfactory in taking the fish usually seined for. In width the blocks seldom exceed a half-inch, and have an oval section. Smaller hand-nets, in which accurate meshing is not desired, are commonly knotted over the finger with much nicety.
The net is started on pegs driven into a beam, corresponding in number with the number of meshes in a tier which it is desired to put into the net, and these netting-beams are a prominent feature on every village green. At a distance from the end of the cord somewhat greater than the proposed width of the net, a bowline knot (A, Fig. 4) is turned in and cast upon the first peg toward the right. The two unequal parts of cord issuing from this knot may, for the sake of distinction, be denominated the ball part and the free part. The latter is carried taut to the second peg, and there stopped close to the beam by a light lashing, and at the top of the peg is passed into an eye or narrow cleft. The mesh-block is now laid against the row of pegs; the ball part is passed first below and then above it from the bowline knot to the second peg, forming the first half-mesh (B, Fig. 4); it is then cast over the second peg, and the free part of the cord attached thereto with a pair of half-hitches (C and D, Fig. 1). The free part is then withdrawn from the eye in the peg, drawn taut through the two half-hitches, and half-hitched back upon itself (E, Fig 1). It is now carried from the knot just formed (C, Fig. 4) to the next peg and there made ready for further use; the ball part is again carried around the mesh-block and hitched and bound as before. Upon the last peg in the row this knot is made,
