Experimental Electricity
��Practical Hints for the Amateur
���Wireless Communication
��A Wireless Telegraph Transmitter with Two Spark Frequencies
�� ��ORDINARILY a radio transmitter using a rotary gap sends out its signals on practically a constant spark frequency, and at the receiv- ing station it is often possible to recognize a numljer of different sending stations by this characteristic alone. It is entirely feasible, ho\ve\er, to change the group frequency of a spark transmitter. One way of doing this by m e r e 1 \' pressing a key or closing a switch is shown in U. S. patent 1,175,418 which was issued during the current year to R. A. I'es- senden. With a device of this sort the transmitting operator can send messages on approximately half power, by using the lower spark fre- q u e n c y when atmospheric and interference condi- d i t i o n s permit.
���JWWWV
��LU^
���Diagram of the complete transmitter
apparatus showing the relations of the
various parts to one another
��Should it be necessary to signal through strong disturbances on high frequency of spark tone, the full power is im- mediately avail- able. The method of variable group frequency may also be applied to two- tone sending, by using one rate of sparking to signal dots and the other for dashes. In this plan of telegraph- ing, the length of impulse for a dash is no longer than that for a dot, and the pitch of tone is the onl>- distin- guishing feature. Thus messages may be transmitted at a somewhat higher speed. Since the rotary- synchronous gap gives absolute- ly pure tones of spark, the arrange- ment of this patent should be especially useful for the two- tone signaling sys- tem.
The figure is re- produced from the patent specifica-
�� �
