Page:Product Eco-responsibility (Regulated Electrical Equipment) Regulation (Cap. 603B).pdf/9

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.

Product Eco-responsibility (Regulated Electrical Equipment) Regulation

Part 2—Division 1
L.N. 143 of 2017
Section 5
B4301

5. Requirements for application

(1) For both an ordinary registration and a short-term registration, the requirements for an application for the purposes of section 33(b) of the Ordinance are that—

(a) the application must be made in the specified form;
(b) the applicant must comply with section 4(3), and any notice given under section 4(4);
(c) the applicant must be a supplier, or will become a supplier, according to the information provided for the application;
(d) the information so provided must be correct and must not be misleading; and
(e) if the applicant has already had an ordinary registration approved—the registration must have been cancelled.

(2) In addition to the requirements in subsection (1), for a short-term registration (intended short-term registration), the requirements for an application for the purposes of section 33(b) of the Ordinance are that the following criteria must be met—

(a) should the application be approved, the applicant’s business of distributing regulated electrical equipment under the intended short-term registration—
(i) would be likely to operate for not more than 30 days; and
(ii) would be likely to give rise to the liability to pay a recycling levy not exceeding $20,000 under section 37(1) of the Ordinance; and