that only the edge touches, the bevel will be short and the edge blunt.
Second—In drawing the blade across the hone diagonally against the edge, the heel should be about one and a half inches in advance of the point, and care should be taken to maintain the same angle when the stroke is reversed and throughout the entire operation. This sets the teeth at the proper angle, that is, slightly inclined toward the heel. We have likened the edge of a razor to that of a saw, but there is this difference: saw teeth incline away from the handle and toward the point, while the razor teeth incline away from the point and toward the heel. This is correct in principle, for the saw in use is pushed away from the handle toward the point, while the razor is usually drawn away from the point toward the heel.
Third—Press with equal force on all parts of the edge. With a good hone, very little pressure will be required.
The time required to hone a razor
