mouldings is in the Museum at Edinburgh, and is here, by favour of the Society of Antiquaries of Scotland, shown as Fig. 140a. The original is of diorite, and was dug up in 1800 at Longniddry,[1] East Lothian.
Another variety of form is shown in Fig. 141, reduced from Sir R. Colt Hoare's great work.[2] In this case the hammer-end would appear to be lozenge-shaped, as there is a central ridge shown on the face. It was found in the Upton Lovel barrow, on the breast of the larger skeleton, near the feet of which the flint celts, polished and unpolished, and various other objects in bone and stone, were found, as previously mentioned.[3] The engraving of this weapon in the Archæologia differs considerably from that given by Sir R. C. Hoare.
In Fig. 142 is shown another form, in which the hammer-end, though flat in one direction, forms a semicircular sweep, answering in form to the cutting edge at the other end. The two faces are ornamented with a slight groove, extending across them parallel to the centre of the shaft-hole. The material of which this axe-hammer is made appears to be serpentine. It was found in the Thames, at London, and is in the British Museum. A "hammer" from a barrow at Wilsford,[4] Wilts, which was associated with a flat bronze celt and other articles of bronze, was of the same type as Fig. 142, but without the grooves.
The very neatly formed instrument represented in Fig. 143, seems to occupy an intermediate place between a battle-axe and a mace or fighting hammer. It is rounded in both directions at the butt-end,
Fig. 142.—Thames, London. 12