rake the fire out from under the copper, and again take out your liquor in your buckets; put the cooler in some place away from the chances of dirt falling into it, and where it may stand level; then strain the liquor into it. The next operation is, the working; and the most difficult part of this is, to ascertain when, precisely, the liquor is cool enough to bear it. Experienced brewers generally ascertain this by the feel of the liquor, by merely putting the finger into it; but it is better to use the thermometer again; plunge it in, and when the quicksilver stands at 70 the heat is right. Then, with your buckets again, put the whole of the liquor out of the cooler into the tun-tub; and take a pint, or thereabouts, of fresh yeast (balm), and mix it in a bowl with some of the liquor; then pour it into the tun-tub with the liquor that is now cool enough to be set to work; mix it up a little by dipping the bowl in once or twice, and pouring it down from a height of two or three feet above the surface of the liquor in the tun-tub; then cover the tun-tub with cloths, as you did the mash-tub. In a few hours it will begin to work; that is, a little froth, like that of bottled porter, will begin to rise upon the surface; when this has risen to its height, and begins to flatten at the top and sink, it should be skimmed off, and is good yeast, and the beer is ready to put into the cask in your cellar. When you put it into the cask, let it stand a day, without being bunged down, because it may work a little there. When you find that it does not, then, if you use finings, put them in, and bung down tightly.
The following receipt is given to me by a gentleman who is celebrated for the excellence of his beer.
Suppose the brewer is about to make a hogshead of beer of good strength. Eight bushels of malt will be sufficient. Let the water, if not soft, stand two days in some vessel in the open air, which will soften it. One hundred and twenty gallons will be sufficient; and, if he uses ground malt, let him remember to attend to the heat of the water in the mash-tub before he puts it in, and also to the stirring and separating as it goes in. When it has stood long enough in the mash-tub, he must draw it off, and put it into the copper, and then throw in ¾ lb. of good hops for every bushel of malt; or, if the hops be not really good and strong, 1 lb. to the bushel. Boil the liquor at least an hour;
