III
HOUSING
17. Introductory Notes
Low cost and small space production make hamsters popular with the small stock fancy and pet raisers. Living quarters should be adapted to the hamster’s nature and to durability in service. Therefore, housing unit details favoring satisfactory production and long usefulness are desired. However, a simple low cost but properly constructed home-made pen is all that is needed for the friendly hamster’s home in domestication. Beware the over-simple, too cheaply built all solid floor pens made to sell and replace. Pens should be built with the idea of using them for years. However, do not be discouraged if the first pens do not look professional. This is a home-hobby job. If widths of lumber do not work out just right, there is no harm in having the top extend an inch or so over the front or back, or both. BUT, be careful to saw ends of all boards squarely to avoid leaving wide cracks or uncovered openings to invite gnawing. Self-cleaning floor features are highly desirable as shown in most of the plans to follow. Hamsters need self-cleaning area in the floor for same reasons as do rabbits. Why don’t rabbit raisers use solid floor hutches? The answer will be clear as we continue through the treatment of housing. We know of no users of laboratory animals within a radius of 175 miles who buy animals raised on solid floors, i.e., floors without self-cleaning features. As per current laboratory supply lists and advertisements, modern laboratory cages have wire floors with droppings trays underneath.
Hamsters stand a wide range of temperature, 55 degrees upward being favorable. Temperature in general is fully treated in Chap. 29. The animals do well in either light or somewhat darkened locations. Direct rays of hot sunshine should be avoided. A reasonable amount of fresh air is appreciated. Detail in construction illustrations show the sim-
—16—
