This page has been validated.
Install hdw. ci. section of floor, then install board section of floor, and door sill by same directions as given In Chap. 22 for Fancier’s 2-Pen Unit. Illus. 31 gives side view showing complete floor, back and top construction. The cross-tie (C.T.) may now be installed as per Illus. 20, 30, 31, 40. Each end and partition is sawed
into, barely enough to permit C.T. to fit Into its top edge, back from front no more than required for closing of doors. With ends and partitions equally spaced, nail cross-tie securely to them, as per Ilius. 30, where
—35—
