This page needs to be proofread.
Table 1—continued
| (1) Item |
(2) Road marking diagram number |
(3) Road marking or sign diagram number |
| 16. | 1062 when placed to indicate a road hump with tapered ends which does not extend across the whole width of the carriageway but ends within 300 millimetres of the kerb-line | 1012.1, 1017 or 1018.1 |
| 17. | 1064 | 2933 and 2934 |
| 18. | 1065 | 670, when placed to indicate the point at which a speed limit begins or as a repeater sign in accordance with direction 11(2), or 674 |
(2) The road marking shown in diagram 1001.2 may be placed only at a junction where traffic is regulated by light signals of the kind prescribed by regulation 33(1).
(3) A road marking shown in a diagram whose number appears in column (2) of an item in Table 2 may be placed on a road only in conjunction with the combination of road markings or signs specified in column (3) of that item.
Table 2
| (1) Item |
(2) Road marking diagram number |
(3) Diagram numbers of road markings or signs in combination |
| 1. | 1002.1 | 601.1 and 1022 |
| 2. | 1003 when used at a level crossing | 602 and 1023 |
| 3. | 1003.3 except when placed at a roundabout with a small central island | 611.1 and 1003.4 |
| 4. | 1022 | 601.1 and 1002.1 |
| 5. | 1024.1 | 1010 and 1014 |
| 6. | 1048 | 1049 and either 959 or 960 |
| 7. | 1048.1 | 1049 and 960 varied to include the pedal cycle symbol |
| 8. | 1049 except when varied to a width of 150 millimetres | (a) 1048 and either 959 or 960; or
(b) 1048.1 and 960 varied to include the pedal cycle symbol |
| 9. | 1049 when varied to a width of 150 millimetres | (a) 957 and 1057;
(b) 959.1 and 1057; or (c) 960.1 and 1057 |
| 10. | 1049.1 | 957 and 1057 |
| 11. | 1050 | 964 and 1049 |
(4) The road marking shown in diagram 1048.3 may be placed on a road if and only if it is placed in conjunction with either—
(a) a combination of the sign shown in diagram 616 and the sign shown in diagram 954 or 954.2; or
421
