560 MISCELLANEOUS RECIPES.
three quarts of water and half a pound of alum mixed and boiled. The mixture will be about as thick as putty, and may be forced into the crevice with a case knife. It will harden like papier-mache.
A POLISH FOR LADIES' KID SHOES.
A FINE liquid polish for ladies' kid shoes, satchels, etc., that is easy of application, recommended as containing no ingredients in any manner injurious to leather, is found by digesting in a closed vessel at gentle heat, and straining, a solution made as follows: Lampblack one drachm, oil turpentine four drachms, alcohol (trymethyl) twelve ounces, shellac one and one-half ounces, white turpentine five drachms, saudarac two drachms.
PASTE FOR SCRAP BOOKS, ETC.
Paste that Will Keep. Dissolve a teaspoonful of alum in a quart of water. When cold, stir in flour, to give it the consistency of thick cream, being particular to beat up all the lumps. Stir in as much powdered resin as will lie on a dime, and throw in half a dozen cloves to give it a pleasant odor. Have on the fire a teacupful of boiling water; pour the flour mixture into it, stirring well all the time. In a few minutes it will be of the consistency of molasses. Pour it into an earthen or china vessel, let it cool, and stir in a small teaspoonful each of oil of cloves and of sassafras; lay a cover on, and put in a cool place. When needed for use, take out a portion and soften it with warm water. This is a fine paste to use to stiffen embroidery.
TO REMOVE INDELIBLE INK.
MOST indelible inks contain nitrate of silver, the stain of which may be removed by first soaking in a solution of common salt, and afterward washing with ammonia. Or use solution of ten grains of cyanide of potassium and five grains of iodine to one ounce of water, or a solution of eight parts each bichloride of mercury and chloride of ammonium in one hundred and twenty-five parts of water.
A CEMENT FOR ACIDS.
A CEMENT which is proof against boiling acids may be made by a composition of India rubber, tallow, lime and red lead. The India rubber must first be melted by a gentle heat, and then six to eight
�� �
