MEMOIRS ON THE FUNDAMENTAL
basin b, and, the electrode of melted lead was retained in the basin a, and, by connection with the proper conducting wire of a voltaic battery, was rendered positive. A volta-electrometer was included in the circuit.
Immediately upon the completion of the communication with the voltaic battery, the current passed, and decomposition proceeded. No chlorine was evolved at the positive electrode; but as the fused chlorine was transparent, a button of alloy could be observed gradually forming and increasing in size at b, whilst the lead at a could also be seen gradually to diminish. After a time the experiment was stopped, the tube allowed to cool, and broken open; the wires, with their buttons, cleaned and weighed; and their change in weight compared with the indication of the volta-electrometer.
In this experiment the positive electrode had lost just as much lead as the negative one had gained, and the loss and gain were very nearly the equivalents of the water decomposed in the volta-electrometer, giving for lead the number 101.5. It is therefore evident, in this instance, that causing a strong affinity or no affinity, for the substance evolved at the anode, to be active during the experiment, produces no variation in the definite action of the electric current.
A similar experiment was then made with iodide of lead, and in this manner all confusion from the formation of a periodide avoided. No iodine was evolved during the whole action, and finally the loss of lead at the anode was the same as the gain at the cathode, the equivalent number by comparison with the result in the volta-electrometer being 103.5.
Then protochloride of tin was subjected to the electric current in the same manner, using, of course, a tin positive electrode. No bichloride of tin was now formed. On examining the two electrodes, the positive had lost precisely as much as the negative had gained; and by comparison with the volta-electrometer, the number for tin came out 59.
It is quite necessary in these and similar experiments to examine the interior of the bulbs of alloy at the ends of the conducting wires; for occasionally, and especially with those which have been positive, they are cavernous, and contain portions of the chloride or iodide used, which must be removed before the final weight is ascertained. This is more usually the case with lead than tin.
36
