Page:Timber and Timber Trees, Native and Foreign.djvu/34

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.

14
TIMBER AND TIMBER TREES.
[CHAP.

tapering or conical form (Fig. 6), and elongating themselves year by year, so that a large proportion of those visible at the butt are traceable at the upper part of the stem. A given diameter of wood consequently contains many more layers at the top than at the butt end of the tree.

The following table is given to show the number of concentric rings counted in the butt and top ends of four very fine English Elm trees:—

Table I.
No. Length. Calliper
Measurement.
Butt-end. Top-end. Percentage of
layers at top.
Wood made
per year.
No. of layers to
one inch.
Diam. Annual
layers.
Diam. Annual
layers.
Butt. Top.
  Feet. Cub. ft. Inches. No. Inches. No.   Cub. ft.    
1 44 158 36 89 18 56 63 1.78 2.47 3.10
2 41 233 36 80 18 74 92 2.90 2.20 4.10
3 35 170 36 66 18 62 94 2.57 1.83 3.42
4[1] 49 355 48 97 18 85 88 3.66 2.02 4.70

From the examples here given, we find that about 84 per cent, of the layers seen at the butt were traceable at the part where the tree was topped off. We also see by the number of layers in one inch of wood at the top, as compared with the butt end, the approximate taper of the cones just referred to.

It is very generally admitted that, in latitudes having the seasons clearly defined as they are in this country, each circle of lignine is completed in one year, but opinions differ as to this being the case in tropical climates, and there are botanists who consider that as


  1. This tree, when cut at 25 feet from the butt, was found to have ninety-two layers at that point.