Proclamations Proc. 7529 ANNEX (continued) 23 (xlvn) w\177re rod products known as "DSUS 70DH wire rod" and designated as X-177, the foregoing of samless steel, having the following chemmal composition (in percent by v.,e\177ght) carbon 0.60 - 0 70; silicon maximum 0.35. manganese 0 60 - 0 80; phosphorus maximum 0 30, sulfur ma,:mmm 0 010; chromium 12.5(I - 13 5t); ;,.lib a deh\177ered hardness of HRB 99 maxm\177um and hardness atkr heat 11catment of HRC miramum 58 Iquenchlng 1050"C for 21)- 30 tumults AC, sub-zc\177o-73 "C for I HR, tempering t80 "C fol I Hr AC), I s I,. H II ,.vcldcd pipes and tubes designated as X-066, X-069, X-079, X-071, X-102, X-139 or X-182, as described belov,. (A) products having an outside dinmeter measuring 457.2 mm or more but not more than 558.8 ram, with a wall thickness measunng 19.05 mm or more, regardless of grade; lB) products having an outside diameter measuring 609.6 mm or more but less than 914.4 ram, the foregoing with a wall thickness measuring over 22.3 mm m grades A, B and X42; a wall thmkness measuring over 19 05 mm In grades X52 through X5: or a wall thickness measuring over 17.48 mm m grade X60 or higher; (C) products ha'\177ing an outside d\177amcter measuring 762 mm or more but less than 914 4 ram. the foregoing with a wall thickness measuring over 31.75 mm m grades A, B and X42; a wall thickness measuring over 25.4 mm m grades X52 through X56; or a wall thickness measuring over 22.3 mm m grades X60 or h\177gher; (D) products having an outside diameter measuring 914.4 mm or more but less than 1066.8 ram, the foregoing with a wall thickness measuring over 34.93 mm in grades A, B and X42; a wall thickness measuring over 31.75 mm in grades X52 through X56; or a wall thickness measuring over 28 58 mm m grades X60 or greater; (El products ha'.qng an outside d\177ameter measunng1066 8 mm or more but less than 1625.6 ram, the foregoing ,,\177nh a wall thickness measuring over 38. [mm in grades A, B and X42; a gall thickness measuring o;er 34.93 mm in grades X52 thiough X56, or a ,.:all thickness measuring over 31.75 mm in grades X60 or h\177gher; (F) products having an outside dinmeter measunng 1219.2 to 1320.8 mm, inclusive, with a wall thickness measuring 20.57 mm or more in grades X-S0 or h\177gher; or (G) products having an outside dinmeter measuring 1219.2 to 1320.8 ram, inclusive, with a wall thickness of 13.72 mm or more in grades X-100 or higher; or (,,l\177x) welded p\177pe and tube products designated as X-132, which are DOM tubing for elecmc submersible oil pump motors; '.,,\177th outside d\177anlcters of 95.25 mm to 171.83 ram. inclusive, having the following chemical composnlon (in percent by weight): carbon maximum 0.15; sdicon 0.25 - 1.00, mclusp,'e: manganese 0.30 - 0.60, Inclusive. phosphorus maximum 0.030: sulfur maxm\177um 0 030, chrommn\177 8 00- I t).Ot), \177nc[usl',C, molybdenum 0 90- I. 10, mclust,.e. (c) Goods may also be excluded from the apphcanon of rebel If they are covered by a determination by the United States Trade Representative (USTR) published in the Federal Register by not later than July 3, 2002, or m March of any subsequent year in which th\177s note remains in effect. that such goods should be exempt from the application of any rate of duty or tariff-rate quota otherwise imposed on goods described in the apphcable superior text. Such a determination by the USTR under this subdivision may exempt specific additional steel products when entered from all countries or when entered from enumerated countries only, or may modify the product descnpnons m subdivision lb) of this note. The USTR \177s authorized to modify or [emilhate any such determination dunng Ihe effective period of the subheadings specified in Ihe first sentence of subdivision (a) of this note and to specify, subsequent to the effective date specified m th\177s note, Illat such steel products will bc considered "goods excluded from the applicanon of rehef" upon publicalton b? linc LS'FR ol'a no,cc m thc Federal Register, Such "goods excluded from the apphcat\177on o\234 rchcl" shall not be counted toward any tariff:rate quota quamines specified for any quota period. (d) (i) For the purposes of this note and the application of subheadings 9903.72.30 through 9903.74.24, 43
�
