non. Sufficient to say that the general plan, in brief, was this: A hole would be dug in the earth, in the center of the largest casting shop—a hole as deep as the gun was to be long. This was about one hundred feet, though the gun, when finished, would be somewhat shorter than this. An allowance was to be made for cutting.
In the center of this hole would be a small "core" made of asbestos and concrete mixed. Around this would be poured the molten steel from great caldrons. It would flow into the hole. The sides of earth—lined with fire-clay—would hold it in, and the middle core would make a hole throughout the length of the central part of the gun. Afterward this hole would be bored and rifled to the proper calibre.
After this central part was done, steel jackets or sleeves would be put on, red-hot, and allowed to shrink. Then would come a winding of wire, to further strengthen the tube, and then more sleeves or jackets. In this way the gun would be made very strong.
As the greatest pressure would come at the breech, or in the powder chamber there, the gun would be thickest at this point, decreasing in size to the muzzle.
It took many weary weeks to get ready for the first cast, but finally Tom received word that it
