RIDING TROUSERS.
Diagram 4.
Measures : 44, 32, 30, 36, 16, 10.
System 0, 45. Side length plus 1 inch.
45 to 12, leg length plus 1 inch (left on for fulling the top-side on over the knee).
12 to 6, one-sixth seat.
12 to 6, one-fourth seat.
12 to 12¼, one-third seat plus ¼ inch.
Square up from 9 and down from 6.
6 to 12, 12 inches.
Mark towards side 1½ inches and draw centre line from 6 through 1½ and F to E.
F to 4, one-fourth knee.
Mark across from A one-fourth waist plus ½ inch.
Lower fronts from 13, 1½ inches.
Shape fork and leg seam.
Make E to 3¾ one-fourth bottom less ¼ inch.
Shape sideseam making E to 4 one-fourth bottom.
Measure up leg from 6 to E, adding 1 inch and squaring by centre line.
Well hollow over foot and complete topside as draft.
 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Vincent's systems of cutting all kinds of tailor-made garments.djvu/22}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
STRAP BUTTONS.
These are placed 3½ inches from centre of heel for first button on either side (see Diagram 29). They should be stayed with linen and tacked through.
UNDERSIDES.
9 to 7, one-sixth seat plus 1.
Or by Registered Square lowering angle at B 1 inch.
9 to 13½, one-eighth seat.
4 to 5,1 inch.
3¾ to 5¼, 1½ inches.
Make undersides 1 inch longer than topsides at 8 for fulling on over seat.
Add 2½ to waist and take out 1 inch fish.
Add 2 to 3 inches over measure at seat.
Make undersides 1 inch shorter in legs than topsides.
Complete as draft.
