 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Vincent's systems of cutting all kinds of tailor-made garments.djvu/261}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
DEFECTS IN SHOULDERS.
Crease from Neck Point to Shoulder Bone: —
Straighten, neck, let out shoulder at scye end, and stretch over the region of the shoulder bone, see Diagram 3by.
Crease from Neck Point to Bottom of Scye:—
Straighten and lengthen neck point as Diagram 370. If collar is short lengthen it. If facings are narrow, let them out.
Crease above the Breast Pocket:—
Give more width to welt, or cut pocket mouth through to scye, and pass lower part forward 4 inch, as in Diagram 371.
Tight at neck, loose at Shoulder End:—
Let out neck point, as in Diagram 372; or lengthen collar, or take in at shoulder end and, if necessary, deepen the scye.
Tight on Shoulder, loose Round Neck:—
Let out at scye end of shoulder, as Diagram 3. 3, and, if neceseary let out sleeve: or take in at neck point and shorten collar.
Circular Crease below Front of Scye:—
Deepen and advance scye as Diagram 374, or lengthen shoulder. If facings are tight or twisted, put them right.
Crease from Front of Scye to Hip:—
Let out under arm seam at waist, as Diagram 375.
Circular Crease at Front of Scye:—
Advance scye as Diagram 376, or if facings are tight let them out.
