Relativity (1931)/Appendix 1
APPENDIX I
SIMPLE DERIVATION OF THE LORENTZ TRANSFORMATION [Supplementary to Section XI]
FOR the relative orientation of the co-ordinate systems indicated in Fig. 2, the -axes of both systems permanently coincide. In the present case we can divide the problem into parts by considering first only events which are localised on the -axis. Any such event is represented with respect to the coordinate system by the abscissa and the time , and with respect to the system by the abscissa and the time . We require to find and when and are given. A light-signal, which is proceeding along the positive axis of , is transmitted according to the equation
or
Since the same light-signal has to be transmitted relative to with the velocity , the propagation relative to the system will be represented by the analogous formula
Those space-time points (events) which satisfy (1) must also satisfy (2). Obviously this will be the case when the relation
is fulfilled in general, where indicates a constant; for, according to (3), the disappearance of involves the disappearance of . If we apply quite similar considerations to light rays which are being transmitted along the negative -axis, we obtain the condition
By adding (or subtracting) equations (3) and (4), and introducing for convenience the constants and in place of the constants and where
and
we obtain the equations
We should thus have the solution of our problem, if the constants and were known. These result from the following discussion.
For the origin of we have permanently , and hence according to the first of the equations (5)
.
If we call the velocity with which the origin of is moving relative to , we then have
The same value can be obtained from equation (5), if we calculate the velocity of another point of relative to , or the velocity (directed towards the negative -axis) of a point of with respect to . In short, we can designate v as the relative velocity of the two systems.
Furthermore, the principle of relativity teaches us that, as judged from , the length of a unit measuring-rod which is at rest with reference to must be exactly the same as the length, as judged from , of a unit measuring-rod which is at rest relative to . In order to see how the points of the -axis appear as viewed from , we only require to take a “snapshot” of from ; this means that we have to insert a particular value of (time of ), e.g. . For this value of we then obtain from the first of the equations (5)
.
Two points of the -axis which are separated by the distance when measured in the system are thus separated in our instantaneous photograph by the distance
But if the snapshot be taken from , and if we eliminate from the equations (5), taking into account the expression (6), we obtain
From this we conclude that two points on the -axis and separated by the distance 1 (relative to ) will be represented on our snapshot by the distance
But from what has been said, the two snapshots must be identical; hence in (7) must be equal to in (7a), so that we obtain
The equations (6) and (7b) determine the constants and . By inserting the values of these constants in (5), we obtain the first and the fourth of the equations given in Section XI.
Thus we have obtained the Lorentz transformation for events on the -axis. It satisfies the condition
The extension of this result, to include events which take place outside the -axis, is obtained by retaining equations (8) and supplementing them by the relations
In this way we satisfy the postulate of the constancy of the velocity of light in vacuo for rays of light of arbitrary direction, both for the system and for the system . This may be shown in the following manner.
We suppose a light-signal sent out from the origin of at the time . It will be propagated according to the equation
,
or, if we square this equation, according to the equation
It is required by the law of propagation of light, in conjunction with the postulate of relativity, that the transmission of the signal in question should take place—as judged from —in accordance with the corresponding formula
,
or,
In order that equation (10a) may be a consequence of equation (10), we must have
Since equation (8a) must hold for points on the -axis, we thus have . It is easily seen that the Lorentz transformation really satisfies equation (11) for ; for (11) is a consequence of (8a) and (9), and hence also of (8) and (9). We have thus derived the Lorentz transformation.
The Lorentz transformation represented by (8) and (9) still requires to be generalised. Obviously it is immaterial whether the axes of be chosen so that they are spatially parallel to those of . It is also not essential that the velocity of translation of with respect to should be in the direction of the -axis. A simple consideration shows that we are able to construct the Lorentz transformation in this general sense from two kinds of transformations, viz. from Lorentz transformations in the special sense and from purely spatial transformations, which corresponds to the replacement of the rectangular co-ordinate system by a new system with its axes pointing in other directions.
Mathematically, we can characterise the generalised Lorentz transformation thus:
It expresses , , , , in terms of linear homogeneous functions of , , , , of such a kind that the relation
is satisfied identically. That is to say: If we substitute their expressions in , , , , in place of , , , , on the left-hand side, then the lefthand side of (11a) agrees with the right-hand side.