MIL-C-44072C
Nonconformance with the coating weight requirements in 3.3.5 or 3.3.9, as applicable, shall be a major defect and be cause for rejection of the lot.
4.5.3 Product inspection (when unit packing in bags as specified in 5.1.1 is required).
4.5.3.1 Net weight inspection. The net weight of the filled and sealed bags shall be determined by separately weighing each sample unit on a suitable scale tared with an average weight of representative empty bags. Results shall be reported to the nearest gram. Any individual sample unit having a net weight of less than 46 grams for brownies or less than 43 grams for oatmeal cookies shall be classified as a minor defect. The lot size shall be expressed in bags. The sample unit shall be one filled and sealed bag. The inspection level shall be –3 and the acceptable quality level (AQL), expressed in terms of defects per hundred units, shall be 2.5.
4.5.3.2 Filled and sealed bag examination. The filled and sealed bags shall be examined for the defects listed in table I. The lot size shall be expressed in bags. The sample unit shall be one filled and sealed bag. The inspection level shall be I and the AQL, expressed in terms of defects pr hundred units, shall be 0.65 for major defects and 2.5 for minor defects.
| Category | Defect | |
|---|---|---|
| Major | Minor | |
| 101 | Tear, hole, or open seal. | |
| 102 | Seal width less than 1/16 inch. 2/ | |
| 103 | Presence of delamination. 3/ | |
| 104 | Unclean pouch. 4/ | |
| 105 | Pouch has foreign odor. |
14
