40
HOME-MADE TOYS FOR GIRLS AND BOYS
the model from which the drawings were made, this measurement is 5½ inches. Cut the two side pieces of the wheel out of a piece of cigar-box wood, and bore a ¼-inch hole through the center of each for the wheel axle. Fasten
Figs. 63 and 64.—Sections through Water-Motor Case.
a spool to the center of one side piece for a pulley-wheel (Fig. 66).
Prepare Eight Paddles 1¾ inches wide and 2½ inches long, out of cigar-box wood. Locate the positions for the ends of the paddles, upon the side pieces, by drawing a horizontal line, a vertical line, and two diagonal lines at angles
