HOME-MADE TOY ELEVATORS
153
the corner of the hall. When this has been done, nail the bottoms of the upper stringers (E in Fig. 236) to the sides of the platform at C and D (Fig. 234), and set the tops in notches cut in the edge of the second floor.
The Treads and Risers of the steps—the horizontal and vertical boards—should be cut out of cigar-box wood.
Figs. 234-237.—Details of Stairs.
Cut
The Newel-Posts out of short square blocks, and
The Hand-Rails out of strips of cigar-box wood. Make a groove in the under side of the hand-rails to receive the ends of
