Considerations of Monsieur Auzout upon Mr. Hook's New Instrument for Grinding of Optick-Glasses.
In the above-mentioned French Tract, there are, besides several other particulars, to be represented in due place, contained some Considerations of Monsieur Auzout upon Mr. Hook's New Engine for grinding Optic-Glasses. Where he premises in General his thoughts touching the working of Great Optick-Glasses, and that by the help of a Turn lathe; affirming first of all, that not only the Engin is to be considered for giving the Figure, but the Matter also, which ought to be brought to greater perfection, than it hath been hitherto. For, he finds it not so easie (at least, where he is) to procure Great pieces of Glass without Veins, and other faults, nor to get such, as are thick enough without Blebbs; which, if they be not, they will yield to the pressure and weight, either when they are fitted to the Cement, or wrought.
Secondly, He finds it difficult to work these Great Glasses of the same thickness, which yet is very necessary, because, that the least difference in Figures so little convex, can put the Center out of the Midle, 2 or 3 Inches; and if they be wrought in Moulds, the length of time, which is required to wear and to smooth them, may spoil the best Mould, before they be finished. Besides, that the strength of Man is so limited, that he is unable to work Glasses beyond a certain bigness, so as to finish and polish them all over so well, as small Glasses; whereas yet, the bigger they are, the more compleat they ought to be: And if any weight or Engine be used to supply strength, there is then danger of an unequal pressure, and of wearing away the Engine; In the mean time, the preciseness and delicateness is
