Jump to content

The Practical Designer for Women's and Misses' Underwear/Woman's Standing Collar

From Wikisource



WOMAN'S STANDING COLLAR—Size 36


Lesson No. 431


The standing collar which is useful for all button-up necks, which is specially used for the pajama blouse, is followed according to the neck measurement, which is 14 inches for size 36. To draft act as follows:

To begin draw a line from A to B and B to D. Measure from A to B, 3 inches, and from B to D, 15 inches, which is 14 inches for all-around neck measurement and 1 inch for seams. Then measure from D to C, 3 inches, and connect a line from A to C. Now divide from B to D, making E, and draw a line up from E to F. Raise up from B to H and D to I, 1 inch each and lower from F to G, with 1 inch at the center line. Curve, as shown on the diagram, from A, K to G and from G to J and C. Also curve from H to E, and from E to I. Deduct a ½ inch from A to K and C to J and draw a line from K to H and J to I, which will complete the standing collar with all necessary seams allowed.